By using a length of bamboo, all that was needed was to create a small reservoir for lamp oil with a support structure which acted as a wind screen. I started by cutting about 6 inches above a bamboo segment node. At 3 inches, I made 3 small cuts evenly spaced around the circumference, then I used a knife to split the bamboo from the end down to the cross cuts, creating in effect 3 fingers at the end. I placed some cotton fiber into the bottom of the segment reservoir and left about an inch above the cut. I then poured lamp oil onto the wick, saturating it well. The wick was then lit and the torch could be carried where needed.

Unless a torch is made of metal, it will eventually be consumed unless it is extinguished. This torch is a visual delight and was quite practical for the event. Remember not to fill the reservoir too full, and lean the torch away from you and other flammable things.